VE series (with hydraulic valve)
VE SERIES
The best-selling traditional breather type, with hydraulic valve
KEY FEATURES
- Single body design
- Interchangeability with DIN series
- Multiple options in different sizes
- Multiple assemblies available (up to 45 kg capacity)
| TECHNICAL DATA | |
| VE model | VE, VEL and VEP series |
| Silicagel capacity | from 0,25 kg up to 45 kg |
| Air inlet | via bottom cup (protected by aluminum housing) |
| S/S protection shield upon request | |
| Special flange executions available | |
| Window | PMMA or temeped glass |
| Unscrewing terminals | |
| Download | |
| Full catalogue |  |
| Order form | |
PRODUCT DESCRIPTION
The CEDASPE VE series traditional breathers are used for dehydrating the air before it enters the transformer.
Air dehydrating breathers are transparent hollow cylinder tubes which contain chemically pure silicon salt (silica gel) with a colored indicator.
The air flows inside the transformer due to the thermal contraction of the oil mass and passes through the silica gel; the silica gel absorbs the humidity, indicating the saturation degree by changing color.
The salt contained in the breather, when saturated, can be easily removed and replaced.
The upper and lower parts are made of a non-porous corrosion-proof aluminum alloy casting. The hollow cylinder is made of PMMA (or tempered glass) and is protected by a stainless-steel frame with windows that allow the visual inspection of the silica gel color.
On the bottom side of the breather, a hydraulic valve (an oil pot inside the lower aluminum housing) prevents continuous air contact with the silica gel and only allows air to pass in both directions (inlet or outlet) when there is a pressure deficiency or excess inside the transformer conservator.
| VE model | Silicagel capacity [kg] | Transformer oil [kg]* | Execution | Flange type | Window | Catalogue |
| VEL "00" | 1 kg | 3500 kg | Modular (double flanged) | Triangle-shaped with 4 holes | both PMMA and tempered glass | |
| VEL "01" | Modular (with bottom oil cup) | |||||
| VEP 01 | Single body (with bottom oil cup) | PMMA | |
|||
| VEP 07 | Tempered glass | |||||
| VEP 29 | 3 kg | 10000 kg | PMMA | |||
| VEP 27 | Tempered glass | |||||
| VEP 49 | 5 kg | 18000 kg | PMMA | |||
| VEP 47 | Tempered glass | |||||
| VE50-F | Round-shaped with 4 holes | both PMMA and tempered glass | |
|||
| VE50M-F | ||||||
| VE80-F | 8 kg | 28000 kg | ||||
| VE80M-F | ||||||
| VE100-F | 10 kg | 36000 kg | ||||
| VE100M-F | ||||||
| VE150-F | 15 kg | 56000 kg | ||||
| VE150M-F | ||||||
| VE200 | 20 kg | 65000 kg | Multiple assembly (double flanged) | |
||
| VE300 | 30 kg | 100000 kg | ||||
| VE400 | 45 kg | 150000 kg | ||||
| Other | ||||||
| Special flange execution | |
|||||
| Assembly sketch | |
|||||
| * values calculated for typical european environmental conditions | ||||||
.png){kind=logo}
